DHD Cop SD QL Mission Numa Shank DTH Bits DTH Hammer Bits DTH
We offer THE COMPLETE SOLUTION including DTH drill bits, DTH
hammer, RC hammers, RC bits, ODEX system, Symemtrix system, drill
rods, shank adapters, accessories and added value services.
- We offer top hammer equipment for every application, such as
underground mining and quarries, road and construction.
- We've been involved in the mining industry for 10 years. We look
for excellent performance in our products and service.
All products are compatible with many products manufactured by Sandvik, Atlas Copco, etc, all our products are widely used in mining, tunneling, quarrying,
construction, and civil engineering project.
1. manufacture as your requirement
2. bit diameter, face shape
3. carbide button shape
4. number of air hole
Bit face shape selection:
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock
formations. Low to medium air pressures. Maximum hole deviation
2. Concave Face
The all-round application bit face specifically for medium hard and
homogenerous rock formations. Good hole deviation control and good
3. Convex Face
For high penetration rates in soft to medium-hard with low to
medium air pressures. It is the most resistance to steel wash, and
may reduce the load and wear on the gauge buttons, but poor hole
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in
medium to hard rock formations. Designed for high air pressures and
good resistance to steel wash step gauge bit.
5. Flat Face Bit
This kind of face shape is suitable for hard to very hard and
abrasive rock formations in applications with high air pressures.
Good penetration rates an resistance to steel wash.
Strict quality controlling
Selected high quality special steels and carbide
Produced by CNC machines
Simple and reasonable design, Low problem rate
Low air consumption, smooth drilling, Maximum impact power, High
|Hammer inch||Bits diameter||Shank|
|1"||64mm-70mm||2 1/2"-2 3/4"||BR1|
|2"||70mm-95mm||2 3/4"-3 3/4"||MACH20/BR2|
|5"||133mm-165mm||5 1/4"-6 1/2"||COP54/DHD350R/MACH50|